Concrete mixers are typically associated with time and labor-intensive jobs. These tools are commonly found in dusty construction sites, with huge piles of construction material and hard hat individuals running around. But even simple tasks can benefit from the use of a concrete mixer. , Getting a concrete mixer can certainly speed up the construction process. People no longer have to spend a lot of energy and time mixing concrete. Even small, simple tasks can benefit from the use of a mixer. Whether you are a newcomer to cement or a seasoned construction professional, understanding some of the best ways to use a mixer can go a long way in boosting your productivity and efficiency in the workplace.

 Some manual Tips to maintain a concrete mixer

  • prepare the workplace

The very first thing you should do is prepare the site for pouring the concrete. Almost all tasks involve manual tasks such as positioning the pour, getting it off, and pounding the floor to a level grade.

  • wear appropriate safety equipment

Make sure you and other workers wear personal protective equipment before working on a cement mixer. Standard safety equipment includes a respirator, goggles, work gloves, and boots. Respirators and gloves are especially important because powdered concrete is harmful and the dust can burn your eyes and hands.

  • keep it locked

Concrete hardens quickly, so make sure you place the mixer as close to the worksite as possible. Shorter travel time means simpler transportation, more trips at shorter intervals, and less fatigue from heavy loads.

  • inspect mixer

Inspect mixer parts carefully before turning on, during use, and as soon as it is turned off. Make sure the mixer blades are not bent. A quick check can save you a lot of money and time in the future.

  • coat the surface

Apply a thin layer of industrial oil to the exterior of the mixer to prevent the cement from collecting and hardening on the surface. You can also add a light layer of fuel to the drum before mixing.

This prevents the cement from sticking to the interior surface. However, using diesel as regular petrol will discolor the concrete mix, changing its consistency.

  • position on a stable floor

 

Place the concrete mixer on a stable, horizontal surface as opposed to irregular or sloping ground. Even if the surface is coated, be sure to place a rigid hardboard or something similar under the mixer to guarantee consistency and avoid accidental spillage.

  • Wash the mixer after use

Gently wash the cement mixer after use. It is a safe and inexpensive way to wash a mixer and does not involve the use of abrasive chemicals.

  • drum drain

Remove the concrete drum immediately after it has stopped turning. You shouldn't wait until the last minute to pour concrete, or it may harden and be impossible to get rid of. Do not use a drum to hold mixed concrete.

  • grease the gears

Rotating and mixing the wet cement inside the drum will cause the gears and pulleys to fall down. Regularly lubricate gears, pulleys, and other moving joints to counteract the stress caused by friction. Not only will your mixer's lifespan be prolonged, but its functionality will remain at its best.

  • keep engine clean

Concrete mixers should only be used outdoors, and all the dust flying around can reach the mixer's engine. Use an air compressor to remove the dust and cement that has accumulated in the motor. A clean motor works better and more efficiently. Plus, you spend less on expensive repairs.

Leave a mixture of two scoops of gravel with three gallons of water for 15 to 25 minutes to ensure the best results. Don't forget to fix the drum angle to make sure all the nooks and crannies are received.

May 17, 2022 04:20

Tags: